CNC turning centre
Shafts, pins, bushes and round parts from bar, forgings or blanks.
| Turning diameter | 365 mm14.4 in |
|---|---|
| Max turning length | 500 mm19.7 in |
| Max bar diameter | 52 mm2.05 in |
| Turret stations | 8 |
Precision CNC machined components, built to your drawing.
High-tolerance turned and milled parts in steel, stainless, brass, copper and engineering plastics. From first samples to volume production, manufactured in Ahmedabad, India.
Turning length up to 500 mm
Checked to 0.01 mm
Your partner for dimensionally critical parts
Omnitech Enterprise is a precision CNC machining company based in Ahmedabad, Gujarat. We specialise in CNC turning and milling of high-accuracy components for customers who need tight tolerances, repeatable quality and dependable delivery.
Our facility runs modern CNC turning and vertical machining centres, operated by a skilled team and supported by in-house inspection, so every batch matches the drawing from the first piece to the last.
High accuracy
Turning and milling of close-tolerance, dimensionally difficult components.
Consistent quality
Measured with Mitutoyo, Insize and Accu instruments.
On-time delivery
Planning built around your schedule and delivery commitments.
Flexible volumes
Set up for samples, small batches and volume production.
Vision
To deliver high-quality, precise CNC-machined products in strict accordance with customer requirements and commitments.
Mission
To pursue excellence through honesty, integrity, continuous improvement and superior customer service across all operations.
Goal
To provide customers with reliable, high-quality products and services at competitive pricing, with consistent delivery performance.
“Every part we ship should match the drawing: first piece, every piece, every order.”
Turning and milling under one roof
Vertical machining centre
Housings, flats, pockets, drilled and tapped features.
| Table size | 1000 × 530 × 510 mm39.4 × 20.9 × 20.1 in |
|---|---|
| Spindle taper | BT-40 |
| Spindle speed | 10,000 rpm |
| Operations | Milling, drilling, tapping |
Operations
- CNC turning
- Milling
- Drilling
- Grooving
- Knurling
- Slotting
- Reaming
- Tapping
- Grinding
- Welding
- Heat treating
- Plating
Starting stock: bar stock, forgings and ring-rolled blanks.
Materials
Steels
- Carbon steel
- Specialty steel
Stainless steels
- SS 303
- SS 304
- SS 304L
- SS 316
Non-ferrous
- Brass
- Copper
- Bronze
Plastics
- Engineering plastics
- PTFE (Teflon)
Other grades on request. Share your drawing and material specification and we’ll confirm feasibility.
Parts we manufacture
Measured, not assumed
- 1
Drawing review
Critical dimensions and tolerances are identified before machining starts.
- 2
First-piece check
The first part of every set-up is measured against the drawing.
- 3
In-process and final inspection
Precision instruments down to 0.01 mm least count.
| Instrument | Range | Least count | Make |
|---|---|---|---|
| Dial vernier caliper | 0–150 mm | 0.02 mm | Accu |
| Dial vernier caliper | 0–300 mm | 0.02 mm | Insize |
| Micrometer | 0–25 mm | 0.01 mm | Mitutoyo |
| Micrometer | 25–50 mm | 0.01 mm | Accu |
| Micrometer | 50–75 mm | 0.01 mm | Insize |
| Micrometer | 75–100 mm | 0.01 mm | Insize |
| Micrometer | 100–150 mm | 0.01 mm | Insize |
| Bore gauge with dial indicator | 35–50 mm | 0.01 mm | Accu |
| Bore gauge with dial indicator | 35–60 mm | 0.01 mm | Insize |
| Bore gauge with dial indicator | 50–160 mm | 0.01 mm | Insize |
| Dial test indicator | 2 mm | 0.01 mm | Accu |
| Magnetic stand | – | – | Accu |
From drawing to delivery in six steps
Send your drawing
Share your drawing, material, quantity and delivery need.
Review and quote
We check feasibility and tolerances and send a clear quotation.
Samples
First samples are produced and inspected for your approval.
Production
Batch or volume production on CNC turning and VMC.
Inspection
In-process and final checks with precision instruments.
Pack and dispatch
Parts are packed to protect the finish and shipped on schedule.
One point of contact
Turning, milling and secondary operations coordinated by one team, so you manage fewer suppliers.
Competitive pricing
Precision manufacturing from Ahmedabad, one of India’s major engineering hubs, at competitive cost.
Built around your schedule
Small batches for development, steady volume for production, planned to your delivery dates.
Send us your drawing. We’ll take it from there.
Share your drawing, material and quantity. We’ll review it and come back with feasibility and a quotation.
- Phone+91 88492 74078
- Works40, Gopinath Ind. Landmark, Kathawada–Singarwa Road, Kathawada, Ahmedabad 382 430, Gujarat, IndiaOpen in Google Maps
- GSTIN24ENRPM4154D1ZW